A pool properly maintained during the winter months can be prepared for a new season of swimming with a minimum of effort. Pump, hose, or sweep away water, dirt, or debris from the cover and deck. Remove the cover and plugs from all openings.

Easy Pool Water Chemistry. Pool Filter should run at least 8 to 10 hours per day (24 hours per day is best). Set your pool timer or remember to run the pool manually if you don’t have a timer. If you are not running your pool 24 hours per day, it is best to have it running during the daylight hours (instead of night).

How To Clear And Clean A Green Pool – Swimming Pool Cleaning – How To Clear A Green Swimming Pool – Part 1 of 2 – Find out how to clear up that swampy green pool in your backyard. Be sure to watch the second half of this video too ! Produced for Poolandspa.com by Poolandspa.TV. Host Dan Harrison.

The Basics of Swimming Pool Filters. Swimming pools and spa are subject to constant contamination from foreign matter brought in by swimmers, wind and articles used in and around the pool. Filtration is the mechanical process of removing this insoluble matter from swimming pool and spa water. Water clarity is important for appearance, hygiene and safety. Filters are universal in pool systems, linked to the circulation system along with the motors and pumps.

Should You Take A Shower Before You Swim In A Pool – Why You Should Shower Before You Swim. Have you ever seen those signs posted in public pools that say you must shower before entering the pool? Have you ever wondered why many pool owners want you to shower before diving in for a cool dip in the water? Showering before entering a pool is one of the least practiced habits before swimming in most countries around the world…

How To Open An Inground Swimming Pool – Video. Host Tim Casey shows you how to completely open up your pool. Part One goes over cover removal, setting up the deck equipment (ladders, rails, diving board) and hooking up the pool filter system. Be sure to see Part 2, which covers a detailed explanation of pool chemicals and then finishing the opening. Produced by Poolandspa.TV for Poolandspa.com.

How to Backwash Hayward DE Filters For Swimming Pools. The purpose of backwashing is to blow out the old DE, with its trapped impurities, so you can replace it with clean DE. Below are the steps you should follow for both “Bump Style” and Multiport Style DE filters.

Swimming Pool Frequently Asked Questions – As the questions keep pouring in, our collection of helpful FAQs keeps growing. Hhere are the latest. If you can’t find what you’re looking for in either our article archives or in the FAQ’s below, please contact us. Also, you can now browse through all our additional articles for tips and tricks…

Basic Pool or Spa Plumbing Systems. To understand the basic plumbing system of a pool or spa, you must follow the path of the water. The water from the pool or spa, not both at the same time, enters the equipment system through a main drain on the floor, through a surface skimmer, or through a combination of both main drain and skimmer. It travels to a three-port valve (if there is no spa, there will be no such valve) and into the pump, which is driven by the attached motor. From the pump, the water travels through a filter, then to the heater, and back through three-port valves to the pool or spa return lines.

Swimming Pool Water Chemistry – Technical Details. Because a swimming pool system begins as a hole in the ground, without any water movement, it is an artificial structure. Consequently, it lacks the three purifiers that protect water quality in natural bodies of water: